home *** CD-ROM | disk | FTP | other *** search
-
- This file contains a summary of all the files in the bin directory.
- -- Manavendra Thakur <thakur@zerkalo.harvard.edu> 11/24/89
-
- README This directory contains pre-compiled versions of all
- the binaries that would be created by running the
- Makefile, for both Sun 3 and Sun 4 machines. (The
- Sun 3 binaries will also work on a Sun 3x machine.)
-
- raw_ip.o.sun3os4 These files are kernel modules that have been
- ip_icmp.o.sun3os4 compiled from source code sent out by Bill Nowicki
- raw_ip.o.sun4os4 of Sun Microsystems <nowicki@sun.com>. The raw_ip.o
- ip_icmp.o.sun4os4 and ip_icmp.o modules are needed to enable Van
- Jacobson's traceroute program, which traces the exact
- network path from your node to any remote host. These
- modules have been tested under SunOS 4.0.3 and 4.0.3c,
- and they do work. To install, you should replace the
- appropriate modules in /sys/arch/OBJ (where "arch" is
- the output of the "arch -k" command when run on your
- system -- either sun3, sun3x, sun4, or sun4c). Then
- recompile and reinstall your kernel. You will also
- need to install the traceroute program (listed
- immediately below).
-
- traceroute.sun3os4 Binaries of Van Jacobson's traceroute program.
- traceroute.sun4os4 These binaries include Matt Mathis' patches for Loose
- Source Record Route support. (This allows you to
- see how site A would send packets to site B. Neither
- site A nor site B has to be yourself.) Install the
- appropriate binary for your architecture in
- /usr/etc/traceroute (or wherever you prefer) and
- make it setuid to root.
-